|
Machine Taper Pin Reamers A Reamer having Taper Cuttings Edge and a parallel shank with a square at the end, for holes tc suit pins with a taper.
| |
As Per I.S 5918-1984 (Taper hole 1 in 30) |
As Per B.S 122/Part II -1964 (Taper hole in 1 in 96) |
| Nominal Diameter |
5 mm to 25 mm |
3/16" to 7/8" |
| Cutting Edge Length |
73 mm to 300 mm |
2.3/4" to 9.1/2" |
| Overall length |
155 mm to 427 mm |
5.3/4" to 13.3/8" |
| large End Diameter |
-
|
0.195" to 0.885" |
| Small End Diameter |
-
|
0.1377" to 0.6878" |
| Morse Taper Shank |
No. 1, 2 and 3 |
No.1 and 2 |
|
